Wallpaper installation can change a room, but it’s not uncommon to encounter issues along the way. Understanding how to troubleshoot these common problems can help you achieve a flawless finish. Find here some typical wallpaper installation Dubai issues and practical solutions to address them.

Bubbles and wrinkles:

One of the most common problems during installation is bubbles or wrinkles appearing on the surface of the wallpaper. This issue often arises from improper application techniques, such as not smoothing the wallpaper adequately. To troubleshoot, start by gently lifting the corner of the affected area and reapplying it. Use wallpaper smoother or a soft cloth to press out any trapped air, working from the center towards the edges. If wrinkles persist, lightly score the bubble with a craft knife and apply a small amount of adhesive beneath the surface, then smooth it out again.

Misalignment of patterns:

Aligning patterns perfectly can be challenging, especially with intricate designs. If you find that your wallpaper isn’t aligning correctly, it’s important to double-check your measurements before cutting. When starting a new strip, ensure it is positioned correctly relative to the previous one. If you notice misalignment after application, gently peel back the wallpaper and reposition it. Ensure to press it back down firmly after realigning to avoid further issues.

Adhesive problems:

Using the wrong type of adhesive or applying too much can lead to problems, such as wallpaper sagging or peeling off. If your wallpaper isn’t sticking, check that you’ve used the appropriate adhesive for your wallpaper type (pre-pasted, traditional paste, etc.). For traditional wallpaper, apply an even coat of adhesive to both the wall and the back of the wallpaper. If the wallpaper is sagging, it may need more adhesive; gently lift it, apply additional adhesive, and re-secure it.

Uneven edges:

Uneven edges can occur if the wallpaper is cut inaccurately or if it wasn’t applied straight. To fix this, carefully trim the edges with a sharp utility knife for a clean finish. For future applications, use a level to ensure your first strip is perfectly vertical. Once the first strip is correctly placed, the following strips should align easily.

Stains and damage:

If your wallpaper develops stains or becomes damaged during installation, quick action is essential. For minor stains, gently dab the area with a damp cloth and mild detergent. For more severe damage, you may need to replace the affected strip. Keep extra wallpaper on hand from your original batch to ensure a perfect match.